thermal mass

Concrete Floor Finish

IMG_2291

The best way that I can think of to add a large amount (20+ tonnes) of thermal mass to a solar home is by adding concrete floors. By doing this, one can get two uses, thermal storage and a finished floor,  out of the same investment. Furthermore, since the mass of a concrete floor is so spread out around the home, thereby giving it a large surface area with which to absorb and release heat, it really is the ideal thermal storage medium for a house with large solar gains.

So we added a 2.5 inch topcoat of concrete over the subfloor. In order to support the extra weight we had to add (recycled!) beams that run the length of the house (north to south).  After it was poured, the concrete was simply trowelled as a preliminary finish.

IMG_0757

pouring concrete floors over a regular subfloors (the walls had to be made 2.5 inches higher to compensate for the depth of the floors)

IMG_0761

a freshly trowelled concrete floor

For the final finish, we were partial to an acid-stain because we've seen some gorgeous stained finishes. Peter Amerongen convinced us to go for a water-based dye for environmental reasons. Man those green types can get in the way sometimes!

A talented man named Skip from Desco Coatings did the final finish. Peter describes the finish as such:
”We sealed the concrete with lithium silicate, then dyed it with water-based dye. The final coat was an epoxy coating, 2-part , 100% solids (so no offgassing because the soldis do not evaporate)."

The finished product is wonderful – a bit different at first, with an organic, charactery type of feel to it (yes, I just made up the word charactery).

The floor has been growing on me by the day.

image

we love the saw cuts in this floor  read more... »

MCNZH - Progress (part 7) - stucco, hardwood, moving in

IMG_1973

The Mill Creek NetZero Home is substantially completed.

The stucco is finished on the outside. We went with a cement-based stucco because of its looks and durability.

Peter Amerongen built a brick wall behind the wood burner. We used the bricks from the foundation of the house that used to be standing on the property. This wall adds more thermal mass (to capture both solar and wood heat) to the house, as well as a bit of history.

IMG_1980  read more... »